Metric Halo SpectraFoo Standard

$ 10,980.00 $ 6,480.00

SpectraFoo Standard FeaturesSpectraFoo was designed to provide all of the tools you need for a powerful suite of digital meters, with all of the resolution of hardware meters...

  • E - Delivery

    Envío Inmediato

  • 30 días de garantía

    Soporte Técnico

  • Amazon México

    Visita la Tienda

SpectraFoo Standard Features
SpectraFoo was designed to provide all of the tools you need for a powerful suite of digital meters, with all of the resolution of hardware meters at a fraction of the price. With more than 15 individual metering tools, SpectraFoo gives you all of the information you need to analyze and prepare your audio, for production, performance, mastering, or broadcast. SpectraFoo was created for live sound engineers, musicians, post-production houses, and broadcast facilities.

Digital Level Meter: This three-in-one digital level meter can simultaneously display Peak, RMS, and VU levels. The meter uses color to distinguish the different modes. The Peak and RMS meters each have independent, resettable peak hold functions. The meter also contains a numerical counter that indicates the largest number of consecutive samples surpassing 0dBFS. The calibration of the meters is referenced against 0dBFS. power2


Peak and RMS Power History: See the history of the information displayed by the Peak and RMS meters. The light grey “tick” marks indicate the passage of one second of time, and the height of the each color for each time “slice” indicates the Peak (yellow) & RMS (purple) power levels of the program. The ratio between these two levels is responsible for the “perceived” volume” of program material. When there is a large difference between the Peak and RMS levels of program material, the perceived volume will be low as compared to the peak levels on the tape. Conversely, when the difference between Peak and RMS levels is small, the perceived volume will be louder. This instrument can help you determine how much compression and limiting is needed for specific program material.


Spectragraph: See spectral performance with widths as small as 2/3 Hz with Foo's realtime, high resolution spectrum analyzer. SpectraFoo creates a new analysis up to 84 times per second, allowing you to see musical structure even at the highest tempos.


Customizable with Peak, Instantaneous, and Average traces, the Spectragraph is fast enough to create a highly detailed, animated “movie” of sonic events. Visualize your audio with the Spectragraph and see details of your recordings you've never seen before - like phase structure, overall spectral balance, dynamic range, frequency range, and low frequency roll-off.

Spectragram: This Real-Time Spectral Power History Analyzer utilizes the same FFT resolution and scale as the Spectragraph to correlate not only frequency and power, but also time. The result is a visual “sonic fingerprint”. Like the Spectragraph, the true power of this instrument lies in its synchronization with the live audio signal. After spending some time “calibrating your eyes to your ears” by watching the Spectragram while listening to music, the instrument literally becomes a waterfall of musical information.


This tool is very effective for precisely identifying frequency overlap and masking effects, such as a bass drum track and a bass track occupying the same frequency range and obscuring each other. It gives you a good picture of the rhythmic aspects of program material and is very helpful in pinpointing timing problems in dense arrangements. The Spectragram represents the power of frequency events through a color scale.

Power Balance History: Compare the power balance between the two input channels as a function of time. The Power Balance History meter is very helpful for precisely identifying the aspects of mixes that don’t have a natural flow of energy between the left and right channels. It is also great for power-balancing natural stereo recordings and two channel measurements of equipment.
Triggering Oscilloscope: See the wave shape characteristics of very low level signals with the full featured oscilloscope. The oscilloscope can trigger and hold the wave form of the signal being monitored. There are are seven available trigger modes:
Free: automatically retriggers on the internal clock;
Normal: triggers the drawing trace once channel input matches your trigger settings
Hold: triggers a drawing trace and holds the signal until rearmed
Hold and Retrigger: same as Hold, but the trigger is automatically rearmed
Timed Hold: same as Hold, but the trigger is automatically rearmed after the desired
"retrigger time"
Polarity Check: same as Hold, but displays all the data prior to the trigger point and triggers
on either polarity and either slope
Timed Polarity Check: rearms after the desired "retrigger time"
Clip Capture: same as Polarity Check but triggers when signal reaches full scale
Timed Clip: Capture rearms after the desired "retrigger time"

Lissajous Phase Scope: The Lissajous Phase Scope shows you the amplitude of the first input signal versus the amplitude of the second input signal. This instantly lets you know if a mix has polarity problems and allows you to see the width of the stereo field of the material being monitored.


Phase Torch: This revolutionary tool compares the phase difference between two channels as a function of frequency, independent of power. The radius from the center is determined by the frequency and the angle is determined by the phase difference between the left and right channels. The center of the graph represents DC while the outer radius represents 22 kHz . In order to help you intuitively identify the frequencies, the phase points are also colored according to their frequency. A mono (in-phase) signal is indicated by what looks like a torch precisely aligned with the Y axis of the scope. An out-of-phase signal appears as a negative version of a mono signal. Delays appear as spirals within the scope. This meter is very useful when recording a musical instrument with multiple microphones to identify the frequency ranges in which phase cancellations are occurring as a result of the comb filter created by the use of multiple mics on a single source.


The Phase Torch can also be used as a very quick and elegant troubleshooting tool for identifying phase anomalies in studio wiring, and a number of other applications including:


• Setting azimuth on analog tape recorders
• Checking for time alignment in complex PA systems
• Frequency sensitive mono compatibility analysis
• Identifying frequency dependent phase and polarity problems (such as an out of polarity high frequency driver in a sound reinforcement system).

Correlation Meter and History: The Correlation Meter reduces the relative phase information between two channels to a number between -1 and 1.The centerline corresponds to a correlation of 0 while the top edge corresponds to +1 and the bottom to -1. Dock the Correlation Meter to the left side of the History Meter and provide both instantaneous and historical data in one composite instrument.
The Correlation History provides you with a time history of the correlation meter. See how the phase correlation evolves over time and track down specific problems while you're listening to the events. If the correlation dips every time the snare drum hits, it is very likely that the channels that contain the snare are causing the problem.

Band Power History: This instrument allows you to see the history of the amount of power in a specified band of the spectrum. Just set the center frequency and the bandwidth of the power band that you are interested in monitoring, down to 1/12 of an octave at 6kHz and use the Band Power History tool as a very effective sibilance meter.


Envelope History: Calibrate your eyes with this sample-editor style scrolling envelope overview. The Envelope History tool is useful for identifying large level changes when the average level is high. It should be used in conjunction with the Peak and Average History display to obtain a good view of the overall dynamics of program material.

System Requirements

Mac OS X 10.6.8 or newer. Intel Processor. AU, VST, or AAX (Pro Tools 10, 11 & 12 DSP & Native) host. 32 & 64 bit.
Windows 7 or newer. Intel Processor. VST or AAX (Pro Tools 10, 11 & 12 DSP & Native) host. 32 & 64 bit.
Licensing Requirements

iLok.com account.
iLok dongle is optional — you may install the license on iLok for portability.
Only one license required – works on all supported platforms.

Para más información sobre el producto, no olvides revisar la página directa de la compañía del producto, ó contactarnos para atenderte.

Audio Plugins México
5517444780

Venta de Equipo de Grabación, Instrumentos, ProAudio, Sintetizadores, Software y Tecnología.

Recuerda que somos distribuidores y resellers oficiales de todas las marcas que ves en nuestra página. Todos y cada uno de los Daw´s, Plugin´s e Instrumentos Virtuales son originales y legales. Estamos aprobados por cada maca para vender cada uno de sus productos en México y en toda Latinoamerica.

Todo es E-delivery como se maneja en USA y Europa desde el 2018.

No Cracks, no OEM (Ojo los OEM no existen desde hace 10 años, que no te mientan), cuidado con la pirateria y los vendedores falsos.

Todos nuestras licencias las registraras directo con el proveedor para que recibas las actualizaciones sin problema alguno, para que puedas correr tus programas sin miedo a que dejen de trabajar.

E-Delivery: Todos los software son E-Delivery. Una vez hecha tu compra recuerda dejar tus datos correctos. Tu código de registro y pasos para instalar tu programa así como instrucciones se te darán en un lapso de 2 a 3 horas. Si llega a pasar algún retraso te avisaremos.

Facturas: Facturamos como lo indica el SAT recuerda, para pedir tu factura una vez que hayas decidido lo que vas a comprar, en tu carrito, en la sección de "Cart Totals" deja la indicación de que requeririas factura. Indica tus datos de facturación completos, uso de CFDI, y el tipo de pago según lo amerite. Si falta algún dato no se podrá emitir tu factura.

Es importante destacar que para facturar todos los preicos son más IVA. 

Tu factura solo se puede pedir los días del mes. Es decir si tú mes acaba el 31 y realizaste una compra. Solo tienes el 31 para pedir tu factura. Llegando el día 1 del siguiente mes NO podremos facturarte. 

Garantías: Nuestra garantía termina con la entrega de la licencia. Por clausulas llevamos registro de todo, por favor no intentes realizar un fraude o meter un reclamo ya que contamos con los registros de cada usuario y de si has usado o instalado el programa. Dudas sobre como usar un progrma o un plguin es directo con la marca.

Manejamos Mercado Libre, Amazon, Linio y Claro Shop: Nuestros productos están también en estos servidores (market places), solo recuerda 2 cosas. En Mercado libre y Amazon el producto tendrá un 20% más sobre su costo por comisiones que nos cobra Amazon y Mercado Libre, en Linio y Claro Shop 15%. En Mercado Libre recuerda que podrás pagar a 12 MSI.

Pagos por Mercado Pago: Se suma un 6% más por uso de terminal, en la sección de pago solo da clic en la opción de  "Mercado Pago"

Pagos por PayPal: Se suma un 6% más por uso de terminal, en la sección de pago solo da clic en la opción de "PayPal".

Pagos por Depósito o Transferencia: El costo final es el marcado por el producto desde el inicio, no se aumenta ningun procentaje. En la sección de pago solo da clic en "Deposito Bancario". Al enviar tu orden y recibirla, te enviaremos los datos para realizar este tipo de pago con el monto final descontando el impuestro por pago electronico. Una vez hecho el pago confirma con tu comprobante a nuestro email: pagostechnomx@gmail.com 

Pagos por Mercado Pago Código QR: Si vas a pagar con tarjeta de débito puedes pedirnos el código QR, escanear el código QR desde tu aplicación de Mercado Pago o Mercado Libre y así pagar el costo del artículo con tu tarjeta de débito o dinero de Mercado Pago sin ningún costo extra. Si vas a pagar con tarjeta de crédito y quieres usar el código QR solo pagarías el 3% de recargo, por favor en la sección de pago solo da clic en "Pago con Código QR Mercado Pago". Una vez recibida la orden te enviaremos a tu email el código Qr correspondiente. Una vez hecho el pago confirma con tu comprobante a nuestro email: pagostechnomx@gmail.com 

Nota: Solo recibimos pagos que vengan de email´s autorizados. (Hotmail, Gmail, Yahoo, Outlook, etc) Correos de otros servidores serán notificados a Shopify, PayPal y Mercado Pago para su revisión, ninguna orden será procesada hasta recibir confirmación de estas entidades.

Reembolsos y Retornos: El realizar una compra es definitiva, no aceptamos retornos y no hay reembolso ya que son licencias y software digitales.


Para más información detallada de los productos te recomendamos ir directamente a la página oficial del producto o llamarnos. 

Audio Plugins México

Número de Servicio: 551-744-4780

 

img

Agregado al carrito!